Відео

I can’t find the design files on the website, anyone know where to find them please

Very nice !

You're right, it is brilliant! I subscribed to your channel after seeing how genius this is. The problem with all the drill press type designs out there is that if you've got a part wider than the capacity of the drill press, then you're just out of luck! Your idea here has a capacity that virtually cannot be exceeded with the size of prints that our machines are currently capable of printing. Thanks for sharing this great idea!

not bad for such old machine. I just got one with very few hours of work.

I added a clamp to my AM scope to clamp it from tipping. I’m sure you’ve noticed it will tip .

Thanks for your brilliant idea. I did have a bit of a problem keeping the iron vertical so I eliminated the piece between the custom-made soldering Iron bracket and the arm. I designed the piece that holds the soldering iron so that it connects directly to the arm thus totally eliminating any possibility of rotating. Works great thanks again for the great idea.

Just found your channel. Awesome! Your have incredible skills. What about the Arduino code? Have you discussed that in any videos, and is the code available? Thanks

👍🏻👍🏻👍🏻👍🏻👍🏻

Super stoked to see this. Really want one for our xstech trainer. Ever finish it?

Nice setup!

Have you thought about putting an adjustable stop on it so you can set each insert to an equal depth? Just a thought don’t know if you think it’s necessary.

Do you have any files for the enclosure? Love it man!

where did you source your aluminum bed im looking for something similar

Which two diameters of solder do you use?

Any chance you have a place where you sell or give your stream deck icons for carbide motion please I would love to use a stream deck Regards, Rick

thats cool but never understood why people need gadgets like these. I just hand hold the iron and never once was I so far off that a screw didnt work afterwards.

What resin did you use for this?

Because I like companies who sponsor UA-cam creators, I went to have a look at Altium Designer. Whelp. $17,090 Canadian Dollars. No "maker" or "hobbiest" license I could find.

Thanks for a great video series on the Shapeoko HDM! Have you ever measured the level of accuracy/repeatability or backlash that you are able to achieve with the HDM machine? I'm trying to decide between the HDM and the StepCraft m1000. Thanks in advance for any information.

oh fu(k, he has a microscope AND an oscilloscope....so hot (◡̃ ₃◡̃)

his setup / tech room is turning me on *fire emoji x3*

l'idee est bonne mais l'ecran verticale l'ai beaucoup moins!

wow great drop GENIUS thanks for sharing!

beautiful!

I miss him so much! RIP

Hi your link to Simple CNC Design files can be downloaded here: is not working. Could you send me the new link . Thanks

Fantastic! Thank you!

Great video. Just one minor thing to point out. What ever lighting you are using is creating light and dark horizontal bands. It is especially noticeable in jump cuts.

so their new machine is out now, but 80k is kinda steep for a kknda hobby machine😂

The machining is amazing here. And I'm super impressed by how small this thing is. But one thing I don't understand is how the tip is constrained. Without a kinematic coupling, it seems like every time it touches something, it will shift position. I'd expect either to have a three point coupling, or epoxy the piezo element in. Maybe I'm missing something. Either way, the craftsmanship is outstanding.

This is one of those ideas that is pure genius! You are AWESOME! 😉😁😁

Loving your content on the HDM. Looking to pick one up myself possibly. Random question: I live in suburbia and will also be operating this machine out of my garage. Is the noise audible from the outside of the house...like from a close neighbor's house? Especially considering you have it in an enclosure, I'm curious to hear your input on this.

Hola quedo genial No tenes las plantillas pero en pdf?

I love this! How well do you think it would hold up for a dremel flex extension as a basic drill press?

Very nice and well done proyect. Congratulations and thank you for shearing!

Great video! Where did you get the new Delrin lead screw nuts?

Well said in that speech, It totally rings true tome.

It looks like this project got shelved for 3 years.

Did I miss what the system cost you total?

Lovely

I've used tapping machines like this, great build! While the machinist in me likes how perpendicular a drill press style is, realistically this is way more practical for most uses

This is real KIS - Keep It Simple. Best solution I found, no short distances, no special parts etc. And on top - the most inexpensive solution of all.

Those buttons are not accessible as those 2 knobs are in the way.. those buttons should have been placed at the bottom.

Nice, well done. I'm in.

Can you provide some insights on how you got a custom large spindle attached to the HDM? I'm planning on getting the 5 Pro to do some milling on aluminum and wood, need to use a spindle like yours. Thanks.

this is amazing, the acrylic inserts and the bending of the plexi really stole the show for me. I've always wanted to try bending some plexi for an arcade project I got on the back burner. Old Bosconian Cabaret has a marquee that is acrylic shaped so I need to do something like what you did to bend it with. If I could say one tiny thing, I would have just 4 buttons, even the most modern vertical game is just 4 buttons and it would look so much classier with less buttons. Maybe add them to the side if needed. Thanks for sharing.

Can I see HALs finished "eye" ? BTW You did a good job Dave, I'm going to reluctantly let you back through the pod bay door. 😉😉

Thank you. I want one now!

How many lumens did you get?

Thanks. Loved it!